STAINLESS STEEL

AISI 305 | EN 1.4303

AISI 305 | EN 1.4303

Description

Raykam 305 is a chromium nickel austenitic stainless steel with a low rate of work hardening due to the elevated nickel content. This low rate of work hardening makes this grade well suited for multi-stage deep drawing applications without process annealing where 304/304L may suffer from cracking issues.

In order to minimize earring during drawing, the directionality introduced during cold rolling must be kept to a minimum amount. Deep drawing quality should be noted when ordering this alloy. It is non-magnetic in the annealed and cold worked conditions and has corrosion resistance similar to 304/304L stainless steel. The Deep drawability is higher than standard 304 grade. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this data sheet.

Applications of 305

  • Spun or deep drawn eyelets
  • Barrels
  • Shells
  • Cold headed rivets or screws
  • Deep Drawn Parts
  • Cutlery, e.g. Cups, Pans
  • Mixing Bowls
  • Automotive Industry
  • Food Processing Industry
  • Heat Exchangers
  • Reators, Pumps, Valves, etc.
Download Datasheet

EQUIVALENT STANDARDS

AISI ASTM EN DIN UNS IS
305 305 1.4303 X4CrNi18-12 S30500

CHEMICAL PROPERTIES

C S P Ni Cr Si N Mn Cu
0.03 0.03 0.045 12 18 1 1.3

MECHANICAL PROPERTIES

YSRp02 TSRm A HRB
260 580 50 95

Available Forms Of AISI 305 | EN 1.4303

SheetsSheets Hover Turn
CoilsCoils Hover Turn
Round PipesRound Pipes Hover Turn
FlangesFlanges Hover Turn
Hex BarsHex Bar Hover Turn
Hex BarsHex Bar Hover Turn
Chequered SheetChequered Plate Hover Turn
FittingsFittings Hover Turn
Square BarsSquare Bars Hover Turn
Square Rectangle Pipes TubesShape Pipes Hover Turn

MORE PRODUCTS IN STAINLESS STEEL